The Stumpjumper Pro is a top-tier do-it-all mind- terrain- and horizon-expansion tool. You get the same FACT 11m carbon frame as our S-Works Stumpjumper with class-leading light weight and all-new suspension kinematics. You get a bike that devours quad-searing climbs with ease and absolutely scorches the descents. You get the picture: This thing rips.
Top that off with SRAM's XO1 Eagle AXS 12-speed drivetrain and FOX Factory suspension and the “bang for the buck” factor is almost as rad as the bike itself.
| Frame
: | FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, flip chip Head Tube/Bottom Bracket adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel
|
| Rear Shock
: | FOX FLOAT DPS Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode Adjustment, 190x45mm
|
| Fork
: | FOX FLOAT 34 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, 140mm of travel
|
| Stem
: | Deity, 35.0mm
|
| Handlebars
: | Roval Traverse SL Carbon, riser bar, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm, 35.0mm
|
| Grips
: | Deity, Knuckleduster, Black
|
| Front Brake
: | SRAM G2 RSC, 4-piston caliper, hydraulic disc, 200mm
|
| Rear Brake
: | SRAM G2 RSC, 4-piston caliper, hydraulic disc, 180mm
|
| Shift Levers
: | SRAM Eagle AXS Rocker Paddle
|
| Rear Derailleur
: | SRAM X01 Eagle AXS
|
| Cassette
: | SRAM XG-1295 Eagle, 10-52t
|
| Chain
: | SRAX X01 Eagle, 12-speed
|
| Crankset
: | SRAM X1 Carbon, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm
|
| Chainrings
: | Alloy, 30T
|
| Bottom Bracket
: | SRAM DUB, BSA 73mm, threaded
|
| Rims
: | Roval Traverse Carbon 29, hookless carbon, 30mm inner width, hand-built, 2Bliss Ready
|
| Front Hub
: | DT Swiss 350, sealed cartridge bearings, 15x110mm spacing, 28h
|
| Rear Hub
: | DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h
|
| Spokes
: | DT Competition Race
|
| Front Tire
: | Butcher, GRID casing, GRIPTON® T7 compound, 29x2.3"
|
| Rear Tire
: | Purgatory, GRID casing, GRIPTON® T7 compound, 29x2.3"
|
| Inner Tubes
: | Standard, Presta valve
|
| Saddle
: | Bridge, 155/143mm, Hollow Ti-rails
|
| SeatPost
: | Bike Yoke, Revive Max, 34.9 (S1:120mm, S2/S3:150mm, S4-S6: 185mm)
|
| Seat Binder: | Alloy, 38.6mm |
